XT60 connectors are widely used in RC vehicles, drones, lithium battery packs, chargers, electronic speed controllers (ESCs), and other DC power systems. Their compact design, polarized connection, and gold-plated contacts make them a popular choice for applications that require a reliable electrical connection.
Choosing the correct XT60 connector involves checking its physical dimensions, wire compatibility, current rating, voltage rating, and connector type. Standard XT60 connectors are available in male and female versions, along with variations such as XT60H, XT60U, XT60E, and XT60PW.
This guide covers standard XT60 connector dimensions, specifications, wire sizes, current ratings, different connector styles, and practical selection tips.
XT60 Connector Size Chart
The standard XT60 connector has a compact two-pole design. Its housing dimensions are generally similar between compatible male and female versions, although small differences can occur in the mating profile and overall length.
The following table summarizes the main reference dimensions.
| Dimension | Standard XT60 Reference Size |
|---|---|
| Overall body length | 20.50 mm |
| Housing width | 16.00 mm |
| Housing height | 8.10 mm |
| Contact spacing | 7.20 mm |
| Contact or terminal dimension | 7.20–7.70 mm, depending on measurement location |
| Number of contacts | 2 |
| Connector shape | Polarized, rectangular |
These measurements are based on standard XT60 product drawings. They are reference dimensions, not universal measurements for every XT60 variant.
XT60 Male Connector Dimensions
The XT60 male connector is commonly used on battery leads and power cables. It has two protruding metal contacts that fit into the corresponding female connector.
Reference dimensions include:
- Overall length: approximately 20.50 mm
- Width: approximately 16.00 mm
- Height: approximately 8.10 mm
- Contact spacing: approximately 7.20 mm
The male connector is commonly supplied with solder terminals for connecting electrical wires.
XT60 Female Connector Dimensions
The XT60 female connector contains two recessed contacts that receive the male connector’s pins.
Its external housing dimensions are similar to the male version. However, the internal contact arrangement and mating geometry are different.
When replacing a female connector, check the exact product drawing instead of relying only on the external housing measurements.
XT60 Connector Specifications Chart
XT60 connectors are designed for DC power connections. Their electrical specifications depend on the manufacturer and exact product version.
The following table summarizes commonly published AMASS XT60 specifications.
| Specification | Reference Value |
|---|---|
| Connector model | XT60 |
| Number of poles | 2 |
| Rated current | 30 A in the original product specification |
| Maximum current under specified conditions | 35 A in some newer series specifications |
| Burst current | 60 A in specified product documentation |
| Rated voltage | 500 V DC in the referenced AMASS specification |
| Recommended wire | 12 AWG |
| Contact material | Gold-plated brass |
| Housing material | Polyamide (PA) |
| Flammability rating | UL94 V-0 |
| Operating temperature | -20°C to 120°C |
| Contact resistance | Approximately 0.55 mΩ in the referenced specification |
| Mechanical life | Depends on product version; check the datasheet |
Important: The current and voltage figures are manufacturer-specific ratings, not a guarantee that every XT60 connector can safely operate at those limits. Continuous current depends on wire size, contact quality, temperature rise, cooling, and installation conditions. Do not treat a burst rating as a continuous rating.
XT60 Connector Wire Size Chart
Wire size is an important part of XT60 connector selection. The conductor must fit the solder cup correctly and carry the required current without excessive heating.
A standard AMASS XT60 specification recommends 12 AWG wire.
| Wire Size | Approximate Cross-Section | Common Application |
|---|---|---|
| 16 AWG | 1.31 mm² | Small, low-current connections |
| 14 AWG | 2.08 mm² | Light DC power wiring |
| 12 AWG | 3.31 mm² | Common XT60 battery wiring |
| 10 AWG | 5.26 mm² | Larger conductors, where compatible |
| 8 AWG | 8.37 mm² | Generally better suited to larger connector systems |
The table is a general wire-size reference, not a statement that every conductor can be installed in a standard XT60 solder cup.
Why Is 12 AWG Commonly Used With XT60?
12 AWG wire is frequently paired with XT60 connectors because it provides a practical balance between current-carrying capability, flexibility, and solder-cup compatibility.
However, the correct cable size also depends on:
- Total cable length
- Continuous operating current
- Peak current
- Ambient temperature
- Insulation temperature rating
- Installation and cooling conditions
For long cable runs or demanding loads, calculate voltage drop and conductor heating before selecting the wire.
AWG to Millimeter Conversion
AWG stands for American Wire Gauge. As the AWG number decreases, the conductor becomes thicker.
| AWG | Diameter (Approx.) | Area (Approx.) |
|---|---|---|
| 18 AWG | 1.02 mm | 0.82 mm² |
| 16 AWG | 1.29 mm | 1.31 mm² |
| 14 AWG | 1.63 mm | 2.08 mm² |
| 12 AWG | 2.05 mm | 3.31 mm² |
| 10 AWG | 2.59 mm | 5.26 mm² |
| 8 AWG | 3.26 mm | 8.37 mm² |
XT60 Current Rating Chart
XT60 current ratings can vary between product versions and test conditions. Some specifications list 30 A, while other AMASS series documentation gives a maximum rating of 35 A under stated wire and temperature-rise conditions.
| Current Category | Reference Rating | Meaning |
|---|---|---|
| Original rated current | 30 A | Rating in the referenced original specification |
| Maximum current in some series specifications | 35 A | Maximum under specified test conditions |
| Burst current | 60 A | Short-duration current in specified documentation |
Can an XT60 Handle 60 Amps?
Some XT60 specifications list 60 A as an instantaneous or burst current. This does not mean that the connector should carry 60 A continuously.
For example, a published XT60 and 12 AWG wire rating from Holybro specifies 30 A continuous current and 60 A instantaneous current for less than one minute under its stated test conditions.
For a continuous 60 A application, choose a connector designed and rated for that load rather than relying on the XT60 burst figure.
What Happens When an XT60 Is Overloaded?
Excessive current can cause:
- Increased contact temperature
- Softening or deformation of the housing
- Damaged solder joints
- Contact discoloration
- Increased electrical resistance
- Melting or connector failure
Always consider the entire electrical path, including battery leads, connectors, wiring, switches, and protection devices.
XT60 Connector Types and Variations
The XT60 family includes several configurations designed for different installation requirements.
1. Standard XT60
The standard XT60 is a two-pole connector with solder terminals for cable connections.
It is commonly used in:
- RC cars
- RC airplanes
- Drones
- Lithium battery packs
- Battery chargers
- Electronic speed controllers
Its polarized housing helps prevent incorrect mating orientation.
2. XT60H Connector
The XT60H is a variation that includes a rear cover or housing feature for additional protection around the soldered wire connections.
Common features include:
- Two electrical contacts
- Polarized mating design
- Rear cover or protective housing
- Solder-type wire termination
The XT60H is useful where additional protection around the cable connection is desired.
3. XT60U Connector
The XT60U is a revised XT60-style connector with a different external housing profile.
It is used in compatible battery and electronic power applications. Its physical dimensions differ from the original XT60, so check the product drawing before designing a close-fitting installation.
4. XT60E Connector
The XT60E family includes panel-mount configurations. These connectors can be secured to an enclosure or equipment housing using mounting features.
They are useful for:
- Battery access panels
- Power distribution boxes
- Electronic enclosures
- RC equipment housings
Check the exact suffix and mounting drawing because XT60E variants may have different dimensions and mounting arrangements.
5. XT60PW Connector
The XT60PW is a right-angle PCB-mount style. It is designed for suitable printed circuit board applications where a direct board connection is required.
Before using it, verify the PCB footprint, pin spacing, mechanical support, and current requirements.
Also Read:
XT60 Connector Comparison Chart
The following table compares common XT60 variations by their general construction and intended installation.
| Connector Type | Connection Style | Main Feature | Typical Application |
|---|---|---|---|
| XT60 | Wire solder | Standard housing | Battery cables |
| XT60H | Wire solder | Rear protective cover | Battery and power leads |
| XT60U | Wire solder | Revised housing profile | Compact power connections |
| XT60E | Panel mount | Enclosure mounting | Power panels |
| XT60PW | PCB mount | Right-angle board connection | Electronic circuit boards |
Not every product variant is interchangeable in every installation. Confirm the mating compatibility and exact product specifications before purchasing replacement parts.
XT60 Male vs. Female Connector
XT60 connectors use two different contact configurations.
| Feature | XT60 Male | XT60 Female |
|---|---|---|
| Contact arrangement | Two protruding contacts | Two recessed contacts |
| Main purpose | Mates with female connector | Receives male connector |
| Common use | Battery or equipment lead | Matching power lead |
| Housing | Polarized | Polarized |
| Connection | Two-pole DC | Two-pole DC |
The terms male and female refer to the contact configuration. Always check the connector manufacturer’s wiring guidance and the polarity markings before soldering.
XT60 Polarity Identification
XT60 connectors commonly use molded positive (+) and negative (-) markings on the housing.
Before connecting a battery or power source:
- Locate the positive and negative markings.
- Identify the corresponding wire polarity.
- Confirm polarity using a multimeter.
- Check the equipment’s wiring diagram.
- Verify the connection before applying power.
Never assume wire color alone confirms polarity. Different equipment manufacturers may use different wiring conventions.
Also Read:
How to Measure an XT60 Connector
Accurate measurements help identify an XT60 connector and determine whether it will fit an existing device.
1. Measure the Housing Length
Use a digital caliper to measure the connector body from front to rear. A standard XT60 reference length is approximately 20.50 mm.
2. Measure the Housing Width
Measure across the widest part of the plastic housing. The standard reference width is approximately 16.00 mm.
3. Measure the Housing Height
Measure the external height of the housing. The standard reference height is approximately 8.10 mm.
4. Check Contact Spacing
Measure the distance between the two contact centers. Standard drawings show approximately 7.20 mm.
5. Identify the Connector Variant
Check whether the connector is a standard XT60, XT60H, XT60U, XT60E, or XT60PW. Variations may have different body profiles and mounting dimensions.
For panel-mount and PCB-mount versions, use the manufacturer’s drawing rather than relying on standard wire-connector measurements.
How to Choose the Correct XT60 Connector
Selecting an XT60 connector requires checking electrical compatibility and physical construction.
1. Determine the Required Current
Calculate the maximum continuous current of the equipment. Consider startup loads and short-duration peaks separately.
Do not choose a connector based only on a burst-current specification.
2. Check the Operating Voltage
Confirm that the connector is suitable for the system voltage and electrical environment.
Although some AMASS XT60 specifications list 500 V DC, this is a manufacturer-specific rating. Verify the exact product datasheet and applicable safety requirements before using an XT60 in a high-voltage system.
3. Select the Correct Wire Size
Choose a conductor that matches the connector’s solder terminals and the application’s current requirements.
12 AWG is a common recommendation for standard XT60 connectors, but cable length and operating conditions also matter.
4. Choose the Correct Connector Type
Select the version that matches the installation:
- Standard XT60 for cable connections
- XT60H for a covered wire connection
- XT60E for panel mounting
- XT60PW for suitable PCB mounting
5. Verify Polarity
Check the positive and negative markings before soldering. Incorrect polarity can damage batteries, controllers, chargers, and electronic equipment.
6. Check Operating Temperature
High current and poor ventilation can increase connector temperature. Make sure the connector, wire insulation, and surrounding equipment can withstand the expected operating conditions.
Also Read:
Common XT60 Connector Applications
RC Cars and Trucks
XT60 connectors are used to connect rechargeable battery packs to electronic speed controllers and other power components.
Drones and Multirotors
Many drone power systems use XT60 connectors for battery connections. The connector must be selected according to the aircraft’s actual current requirements.
RC Airplanes
XT60 connectors provide removable connections between batteries and compatible power systems.
Lithium Battery Packs
XT60 connectors are commonly found on lithium battery leads and portable DC power equipment. Proper polarity, insulation, and current selection are essential.
Battery Chargers
Compatible XT60 connections make it convenient to connect charging leads and battery packs. Always follow the charger’s voltage and polarity requirements.
Portable Power Equipment
XT60 connectors are also used in certain portable power systems, testing equipment, and custom DC electrical assemblies.
Common XT60 Connector Sizing Mistakes
Confusing Burst Current With Continuous Current
A connector that supports a short current peak may not be suitable for carrying that same current continuously.
Using the Wrong Wire Gauge
An undersized conductor can overheat even when the connector itself is correctly selected.
Ignoring Connector Variations
XT60, XT60H, XT60U, and panel-mount versions can have different external dimensions. Check the exact model before ordering.
Incorrect Polarity
Reversed polarity can damage sensitive electronics. Verify the positive and negative connections before applying power.
Poor Soldering
Insufficient soldering, damaged contacts, or loose wire connections can increase resistance and cause overheating.
Ignoring Heat and Installation Conditions
Connector performance depends on more than its nominal current rating. Ambient temperature, airflow, cable length, and duty cycle all matter.
Frequently Asked Questions
What are the standard XT60 connector dimensions?
A standard XT60 reference drawing shows an overall body length of approximately 20.50 mm, a width of 16.00 mm, and a height of 8.10 mm. Always check the exact model drawing for final measurements.
What is the standard XT60 current rating?
The original AMASS XT60 specification lists 30 A rated current and 60 A instantaneous current. Some newer series specifications list a maximum of 35 A under specified conditions.
What wire size is used with an XT60 connector?
12 AWG is commonly recommended for standard XT60 connectors. The exact wire size must match the contact or solder-cup specification and the electrical load.
Can an XT60 handle 60 A continuously?
No. A 60 A figure in some specifications refers to short-duration or burst current, not continuous operation. Use a connector specifically rated for the required continuous load.
Are XT60 male and female connectors the same size?
Their external housings are broadly similar, but their contact configurations and mating profiles are different. Use the correct matching pair.
What is the difference between XT60 and XT60H?
XT60H is a variation that includes an additional rear cover or protective housing feature around the wire connection. The standard XT60 has a simpler wire-terminal design.
Can XT60 connectors be used for batteries?
Yes. XT60 connectors are commonly used with rechargeable battery packs, including suitable lithium battery systems. Check voltage, current, polarity, and wire compatibility.
Are XT60 connectors waterproof?
Standard XT60 connectors should not be considered waterproof. Their protection level depends on the exact product design and installation. Use an appropriately rated connector for wet or outdoor environments.
How many pins does an XT60 connector have?
A standard XT60 connector has two electrical contacts: positive and negative.
Conclusion
XT60 connectors are compact two-pole DC power connectors commonly used in drones, RC vehicles, battery packs, chargers, and electronic equipment. A standard XT60 has reference housing dimensions of approximately 20.50 × 16.00 × 8.10 mm and commonly uses 12 AWG wire.
Before selecting one, verify the exact connector variant, current rating, voltage rating, wire compatibility, polarity, and installation dimensions. For demanding electrical applications, use the manufacturer’s datasheet rather than relying on general XT60 ratings.