XT90 Connector Size Chart: Standard Sizes Guide

XT90 connectors are commonly used in high-current DC applications, including RC vehicles, drones, electric skateboards, lithium battery packs, battery chargers, and electronic speed controllers (ESCs). Their two-pole design, gold-plated contacts, and polarized housing provide a convenient connection for battery-powered equipment.

Although XT90 connectors are often associated with 90-amp applications, their actual continuous current rating depends on the connector version, wire size, temperature, and operating conditions. Choosing the correct XT90 connector therefore requires checking its physical dimensions, electrical specifications, cable compatibility, and connector type.

This guide explains standard XT90 dimensions, current ratings, wire sizes, male and female configurations, XT90S anti-spark connectors, and practical selection considerations.


XT90 Connector Size Chart

The standard XT90 is a two-pole power connector with a compact rectangular housing. Its physical dimensions vary slightly between standard cable versions, anti-spark versions, and connectors with rear covers.

The following measurements are useful reference values for identifying a standard XT90-style connector.

Dimension Standard XT90 Reference
Number of contacts 2
Connector type Polarized DC power
Approximate front-face width 20.8 mm
Approximate front-face height 10.9 mm
Approximate body length 25.2 mm
Contact arrangement 2 poles
Common wire connection Solder termination
Contact material Gold-plated brass

These measurements refer to a particular XT90 housing drawing and should not be applied to every XT90 variant. The overall dimensions can change when a rear cover, anti-spark section, or mounting feature is included.

XT90 Male Connector Dimensions

The XT90 male connector has two exposed contacts that fit into the matching female connector.

Common characteristics include:

  • Two electrical contacts
  • Polarized plastic housing
  • Gold-plated contact surfaces
  • Solder-type cable termination
  • Compatibility with the corresponding XT90 female version

The exact external dimensions depend on the housing design and whether a protective rear cover is installed.

XT90 Female Connector Dimensions

The XT90 female connector has two recessed contacts that receive the male connector’s pins.

Its external housing is designed to mate with the corresponding male connector. However, the internal contact geometry is different.

When replacing a connector, confirm that both halves belong to compatible XT90 versions. Similar-looking connectors from different product families are not necessarily interchangeable.


XT90 Connector Specifications Chart

The following table summarizes common specifications for genuine AMASS XT90-style connectors. Exact values can differ between standard XT90, XT90H, XT90S, and newer product variations.

Specification Common Reference
Connector family XT90
Number of poles 2
Continuous current 45 A under specified conditions
Burst current Up to 90 A in specified product documentation
Recommended wire 10 AWG
Contact material Brass
Contact plating Gold
Housing material Polyamide (PA)
Flammability rating UL94 V-0
Operating temperature -20°C to 120°C
Rated voltage Check exact product datasheet
Connection method Soldering
Connector design Polarized

Important: These are not universal ratings for every connector sold as XT90. The continuous and burst current figures must be checked against the exact manufacturer’s specification. Third-party copies may have different contact materials, dimensions, and electrical performance.


XT90 Connector Current Rating Chart

The XT90 family is designed for higher-current applications than smaller connectors such as XT30 and XT60. However, the number in the connector name should not automatically be interpreted as its continuous current rating.

For example, a commonly documented AMASS XT90 configuration using 10 AWG wire is rated for 45 A continuous and 90 A instantaneous current under specified test conditions.

Current Category Reference Rating Description
Continuous current 45 A Current under specified operating conditions
Burst current 90 A Short-duration current under specified conditions
Recommended wire 10 AWG Common cable specification
Number of poles 2 Positive and negative connections

These figures are reference ratings, not a guarantee for every installation. Cable length, ambient temperature, airflow, solder quality, and duty cycle can affect actual performance.

Can an XT90 Handle 90 Amps Continuously?

A 90 A burst rating does not mean that an XT90 can safely carry 90 A continuously.

A documented XT90 and 10 AWG wire configuration specifies 45 A continuous current and 90 A instantaneous current for a limited duration. Continuous operation at 90 A can produce excessive heat and damage the connector or wiring.

For an application requiring continuous current above the connector’s specified rating, choose a larger connector designed for that electrical load.

Why Does an XT90 Connector Get Hot?

An XT90 connector can become hot when current exceeds its suitable operating range or when the electrical connection has excessive resistance.

Common causes include:

  • Undersized wire
  • Poor solder joints
  • Damaged or worn contacts
  • Low-quality connector materials
  • Loose connections
  • Excessive continuous current
  • High ambient temperature

Inspect connectors that show discoloration, softened plastic, unusual heat, or signs of melting. Replace damaged components before using the equipment again.


XT90 Connector Wire Size Chart

Wire size is a major factor in XT90 connector performance. The conductor must fit the connector’s solder terminals and safely carry the required current.

10 AWG is a commonly specified wire size for standard XT90 applications.

Wire Gauge Approximate Cross-Section General Application
16 AWG 1.31 mm² Low-current wiring
14 AWG 2.08 mm² Light power connections
12 AWG 3.31 mm² Medium-current wiring
10 AWG 5.26 mm² Common XT90 cable size
8 AWG 8.37 mm² Larger conductors; verify terminal compatibility
6 AWG 13.30 mm² Generally requires a connector designed for larger cables

This is a general wire-size reference, not a guarantee that all these wire gauges fit a standard XT90 solder cup.

Why Is 10 AWG Commonly Used With XT90?

10 AWG wire is commonly paired with XT90 connectors because it provides a practical balance between conductor capacity, flexibility, and compatibility with the connector’s solder terminals.

However, the correct cable size depends on:

  • Continuous current
  • Peak current
  • Cable length
  • Voltage drop
  • Ambient temperature
  • Insulation temperature rating
  • Installation conditions

A long cable run may require a larger conductor to reduce voltage drop and heating.

AWG to Millimeter Conversion Chart

AWG stands for American Wire Gauge. A lower AWG number represents a thicker conductor.

AWG Approximate Diameter Cross-Sectional Area
18 AWG 1.02 mm 0.82 mm²
16 AWG 1.29 mm 1.31 mm²
14 AWG 1.63 mm 2.08 mm²
12 AWG 2.05 mm 3.31 mm²
10 AWG 2.59 mm 5.26 mm²
8 AWG 3.26 mm 8.37 mm²
6 AWG 4.12 mm 13.30 mm²

XT90 Connector Types and Variations

The XT90 family includes several connector designs for different installation requirements. The most important differences involve the housing, cable protection, anti-spark features, and mounting arrangement.

1. Standard XT90 Connector

The standard XT90 is a two-pole connector commonly used for battery and DC power connections.

Its main features include:

  • Two electrical contacts
  • Polarized housing
  • Gold-plated contacts on specified versions
  • Solder-type wire termination
  • Male and female configurations

Typical applications include RC vehicles, battery packs, drones, and power equipment.

2. XT90H Connector

The XT90H is a cable-style variation that uses a rear cover to protect and organize the soldered wire connection.

Common features include:

  • Two-pole power connection
  • Rear protective cover
  • Solder-type cable termination
  • Polarized mating design
  • Compatible XT90 housing arrangement

The rear cover helps protect the solder-joint area, but it does not automatically make the connector waterproof.

3. XT90S Anti-Spark Connector

The XT90S is designed to reduce electrical sparks when connecting a battery to equipment with large input capacitors.

It incorporates an anti-spark mechanism that allows the circuit to make an initial connection through a resistor before the main contacts complete the connection.

This helps reduce the inrush spark commonly seen when connecting high-energy batteries to electronic speed controllers and similar equipment.

Typical applications include:

  • Electric skateboards
  • High-power RC vehicles
  • Drone power systems
  • Battery-powered machinery
  • ESC and battery connections

The anti-spark version must be paired with a compatible connector configuration. Check the manufacturer’s mating instructions before installation.

4. XT90E Connector

XT90E versions are designed for panel-mount installations. They can be fitted to suitable equipment enclosures and power panels.

Common applications include:

  • Battery access panels
  • Power distribution boxes
  • Electronic enclosures
  • Portable power systems

Mounting dimensions, screw positions, and overall depth depend on the exact XT90E version.

5. XT90 PCB-Mount Variants

Some XT90 family products are designed for printed circuit board mounting.

These versions may use vertical or horizontal mounting arrangements. Their dimensions and pin layouts are different from standard cable connectors.

Before designing a PCB, use the exact manufacturer’s footprint drawing and verify mechanical support, solder-pad dimensions, and electrical ratings.


XT90 Connector Comparison Chart

Connector Type Main Design Installation Main Feature
Standard XT90 Two-pole housing Cable soldering General DC power connection
XT90H Covered cable housing Cable soldering Rear protection for solder joints
XT90S Anti-spark design Cable connection Reduces connection sparks
XT90E Panel-mount housing Equipment enclosure Fixed mounting
XT90 PCB variant Board-mount contacts Printed circuit board Direct PCB connection

Not all variants have identical dimensions or electrical specifications. Always check the exact model number before purchasing a replacement.

Also Read:


XT90 Male vs. Female Connector

XT90 connectors are supplied in male and female configurations. Both versions have a polarized housing, but their contact arrangements are different.

Feature XT90 Male XT90 Female
Contact design Exposed contacts Recessed contacts
Main function Mates with female connector Receives male connector
Number of contacts 2 2
Connection type DC power DC power
Cable termination Commonly soldered Commonly soldered
Polarity Positive and negative Positive and negative

The male and female labels describe the contact configuration, not the electrical polarity.

XT90 Polarity Identification

XT90 housings commonly include molded positive (+) and negative (-) markings.

Before connecting the battery:

  1. Locate the positive and negative markings.
  2. Identify the corresponding wire connections.
  3. Check the battery and equipment wiring diagrams.
  4. Confirm polarity with a multimeter.
  5. Inspect the solder joints and insulation before applying power.

Never rely on wire color alone. Wiring conventions can differ between manufacturers and equipment.

Also Read:


How to Measure an XT90 Connector

Accurate measurements help identify an XT90 connector and confirm whether it will fit an existing installation.

1. Measure the Front Face

Use a digital caliper to measure the front mating surface. A common XT90H reference drawing shows a face approximately 20.8 mm wide and 10.9 mm high.

2. Measure the Overall Length

Measure from the front mating surface to the rear of the connector housing. A particular XT90H drawing shows approximately 25.2 mm for the connector body.

A rear cover or additional anti-spark section can increase the overall length.

3. Check the Contact Arrangement

Confirm that the connector has two power contacts and that their spacing and orientation match the corresponding connector.

4. Identify the Connector Variant

Check whether the connector is standard XT90, XT90H, XT90S, XT90E, or a PCB-mount version.

5. Check the Mounting Space

For panel-mount and PCB versions, measure the mounting hole positions, body depth, and clearance around the connector.

Use the exact manufacturer’s dimensional drawing for final design work.


How to Choose the Correct XT90 Connector

Selecting the right XT90 connector requires checking the electrical load, physical configuration, and installation environment.

1. Determine the Required Current

Identify the maximum continuous operating current of the equipment. Consider startup current and short-duration peaks separately.

Choose a connector with a suitable continuous rating rather than relying on its burst rating.

2. Check the System Voltage

Confirm that the connector is rated for the system’s operating voltage and electrical environment.

Do not assume that every XT90 product has the same voltage rating. Verify the exact manufacturer’s datasheet.

3. Select the Correct Wire Size

Choose wire that fits the connector terminals and can safely carry the required current.

10 AWG is a common XT90 recommendation, but cable length, temperature, and installation conditions may require a different conductor.

4. Choose the Correct Connector Type

Select the connector based on its intended use:

  • Standard XT90 for general cable connections
  • XT90H for covered cable connections
  • XT90S for anti-spark battery connections
  • XT90E for panel mounting
  • PCB-mount variants for suitable circuit-board applications

5. Verify Polarity

Check the positive and negative markings before soldering or connecting the battery. Incorrect polarity can damage electronic equipment.

6. Consider Operating Temperature

High current and limited airflow can increase connector temperature. Check the manufacturer’s temperature and derating information before using the connector in demanding applications.

Also Read:


XT90 vs. XT60 vs. XT30 Connector Size Chart

XT30, XT60, and XT90 connectors belong to the same general connector family but are designed for different current classes and physical requirements.

Feature XT30 XT60 XT90
Number of poles 2 2 2
Common wire size 16 AWG 12 AWG 10 AWG
Common continuous current class 15 A 30 A 45 A
Common burst current class 30 A 60 A 90 A
Relative housing size Small Medium Large
Typical applications Small electronics and RC equipment RC batteries and drones Higher-current battery systems

These are reference values for specified AMASS configurations, not universal ratings for all products sold under these names.

Which Connector Should You Choose?

  • Choose XT30 for suitable low-current applications.
  • Choose XT60 for compatible medium-current applications.
  • Choose XT90 when a larger connector and higher specified current capacity are required.

The correct choice depends on the actual continuous load, wire size, voltage, and operating environment.


Common XT90 Connector Applications

RC Cars and Trucks

XT90 connectors are used to connect battery packs to electronic speed controllers in higher-power RC vehicles.

Drones and Multirotors

Some larger drone systems use XT90 connectors for battery connections where the current requirements exceed the suitable capacity of smaller connector types.

Electric Skateboards

XT90 and XT90S connectors are used in some electric skateboard battery and controller systems. Anti-spark versions can help reduce connection sparks caused by controller input capacitors.

Lithium Battery Packs

XT90 connectors are commonly used with compatible lithium battery systems. Correct polarity, cable sizing, and current selection are essential.

Battery Chargers

XT90 connectors provide removable DC connections for compatible battery charging systems. The connector must match the charger’s voltage and current requirements.

Power Distribution Systems

Suitable XT90 versions can be used in custom DC power distribution assemblies, testing equipment, and portable power systems.


Common XT90 Connector Sizing Mistakes

Confusing Burst Current With Continuous Current

A connector rated for a short current peak may not be suitable for carrying that current continuously.

Choosing the Wrong Wire Size

Undersized wire can overheat even when the connector itself is correctly selected.

Ignoring Connector Variants

Standard XT90, XT90H, XT90S, and XT90E connectors may have different dimensions and installation requirements.

Using an Incompatible Anti-Spark Connector

XT90S anti-spark versions have a specific mating arrangement. Confirm compatibility before connecting them to another XT90 product.

Poor Soldering

Insufficient soldering or damaged contacts can create a high-resistance connection. Use suitable tools and follow the manufacturer’s assembly instructions.

Ignoring Connector Temperature

A connector can become too hot when operated beyond its suitable current or temperature conditions. Check the entire power connection, not just the connector label.


Frequently Asked Questions

What are the standard XT90 connector dimensions?

A particular XT90H drawing shows a front face of approximately 20.8 × 10.9 mm and a body length of approximately 25.2 mm. Other XT90 versions may have different dimensions.

What is the continuous current rating of an XT90 connector?

A commonly documented AMASS XT90 configuration with 10 AWG wire is rated for 45 A continuous current under specified conditions. Check the exact product datasheet for the version being used.

Can an XT90 handle 90 amps?

Some XT90 specifications list 90 A as a burst or instantaneous current. This is not the same as a continuous rating.

What wire size is commonly used with XT90?

10 AWG is a common wire recommendation for standard XT90 connectors. The correct size depends on current, cable length, temperature, and terminal compatibility.

What is the difference between XT90 and XT90S?

XT90S includes an anti-spark mechanism designed to reduce the spark that can occur when connecting a battery to equipment with large input capacitors.

What is the difference between XT90 and XT90H?

XT90H is a cable-style version with a rear cover that protects and organizes the solder-joint area. It does not automatically provide a waterproof connection.

Are XT90 connectors waterproof?

Standard XT90 connectors should not be considered waterproof. Their protection depends on the exact product design and installation.

How many pins does an XT90 connector have?

A standard XT90 has two main electrical contacts: positive and negative.

Can I use an XT90 connector for a lithium battery?

Yes. XT90 connectors are commonly used with suitable lithium battery systems. Confirm voltage, continuous current, polarity, and cable compatibility before installation.


Conclusion

XT90 connectors are widely used for higher-current DC connections in RC vehicles, drones, electric skateboards, battery packs, and other power equipment. A particular XT90H reference drawing shows a front face of approximately 20.8 × 10.9 mm and a body length of approximately 25.2 mm. A commonly documented AMASS configuration uses 10 AWG wire and has a 45 A continuous rating with a 90 A instantaneous rating under specified conditions.

Before choosing an XT90 connector, verify its exact dimensions, current and voltage ratings, wire compatibility, polarity, and connector variation. Use the manufacturer’s product drawing and datasheet for final selection, especially in high-current battery applications.