MC4 Connector Size Chart: Complete Sizes Guide

MC4 connectors are widely used in solar photovoltaic (PV) systems to connect solar panels, extension cables, combiner boxes, and other DC electrical equipment. They provide secure, weather-resistant connections and are designed for outdoor solar installations.

Choosing the correct MC4 connector requires checking more than its physical dimensions. Cable cross-section, cable outside diameter, current rating, voltage rating, contact type, and connector compatibility are all important.

This guide covers standard MC4 connector sizes, male and female dimensions, solar cable sizes, electrical specifications, connector types, and practical selection methods.


MC4 Connector Size Chart

MC4 connectors use a 4 mm contact system and are commonly available for solar cables with conductor cross-sections of 2.5 mm², 4 mm², and 6 mm². Some newer connector families also support 10 mm² cables.

The following chart summarizes common connector and cable sizes.

MC4 Specification Standard Reference
Connector system 4 mm
Number of contacts 1 per connector
Typical cable sizes 2.5, 4, 6 mm²
Larger compatible cable size 10 mm² on specified models
Common cable outside diameter Approximately 5.5–9 mm
Connection type Crimping or specified spring-clamp design
Connector configuration Male and female
Application Solar DC connections

MC4 is a connector system rather than one universal product with identical dimensions. Different manufacturers and product generations may have different housing lengths, cable-entry dimensions, and electrical ratings.

MC4 Male Connector Dimensions

The male MC4 connector uses a plug contact that mates with the corresponding female socket.

A common original MC4 cable-coupler assembly has approximately the following external dimensions:

  • Overall length: approximately 58 mm
  • External housing diameter: approximately 18.8 mm
  • Contact system: 4 mm
  • Cable compatibility: model-dependent

These are reference dimensions for a particular connector assembly, not universal dimensions for every MC4 product.

MC4 Female Connector Dimensions

The female MC4 connector uses a socket contact that receives the male plug.

A common original MC4 cable-coupler assembly has approximately the following reference dimensions:

  • Overall length: approximately 61 mm
  • External housing diameter: approximately 18.8 mm
  • Contact system: 4 mm
  • Cable compatibility: model-dependent

Always use the dimensional drawing for the exact connector model when designing cable assemblies or replacement connections.


MC4 Connector Cable Size Chart

Cable size is one of the most important factors when choosing an MC4 connector. The connector contact must match the conductor cross-section, while the cable gland must fit the cable’s outside diameter.

Cable Cross-Section Approximate AWG Typical Application
2.5 mm² 14 AWG Smaller PV cable connections
4 mm² 12 AWG Common residential solar wiring
6 mm² 10 AWG Higher-current solar strings
10 mm² 8 AWG Larger PV cable connections on compatible models

The AWG values are approximate equivalents. Always select the contact using the actual conductor cross-section and the manufacturer’s approved cable specification.

2.5 mm² MC4 Cable

A 2.5 mm² conductor is used in some smaller solar wiring applications. The selected connector must have a contact designed for this conductor size.

4 mm² MC4 Cable

4 mm² is a common cable size in photovoltaic installations. It is frequently used for solar panel connections and compatible extension cables.

6 mm² MC4 Cable

6 mm² cable provides a larger conductor cross-section than 4 mm² cable. It may be selected when the circuit current, cable length, voltage drop, and installation conditions require it.

10 mm² MC4 Cable

Some newer MC4 product families support 10 mm² conductors. This cable size requires a connector and contact specifically designed for the larger conductor.

Do not assume that a standard 4–6 mm² connector can accept 10 mm² cable.


MC4 Connector Cable Diameter Chart

The cable’s outside diameter is different from its conductor cross-section. Both measurements matter when selecting an MC4 connector.

Cable Cross-Section Typical Cable Diameter Range
2.5 mm² Depends on cable insulation and manufacturer
4 mm² Approximately 5.5–7.4 mm on some models
6 mm² Approximately 5.5–8.8 mm on some models
10 mm² Approximately 5.5–8.8 mm on compatible models

These are reference ranges for particular connector configurations. Actual cable diameter depends on insulation thickness, cable construction, and manufacturer.

Why Cable Outside Diameter Matters

The connector gland or sealing nut must fit the cable correctly. If the cable is too small, the seal may not grip it properly. If it is too large, the cable may not enter the housing or the gland may not close correctly.

Always check both the conductor cross-section and cable outside diameter in the connector datasheet.


MC4 Connector Current Rating Chart

MC4 current ratings vary according to the connector model, cable cross-section, certification standard, and operating conditions.

The following table shows reference ratings published for the Stäubli MC4-Evo stor connector.

Cable Cross-Section IEC Rated Current
2.5 mm² 32 A
4 mm² 42 A
6 mm² 47 A
10 mm² 62 A

The same product documentation lists different UL ratings based on AWG cable sizes:

Wire Size UL Rated Current
14 AWG 30 A
12 AWG 39 A
10 AWG 50 A
8 AWG 70 A

These figures apply to the specified MC4-Evo stor product and its test conditions. They should not be applied automatically to every MC4 connector.

What Determines MC4 Current Capacity?

Several factors influence the allowable current:

  • Connector model and contact design
  • Cable conductor cross-section
  • Cable insulation and temperature rating
  • Ambient temperature
  • Installation conditions
  • Contact resistance
  • Applicable certification standard

A connector’s current rating should always be checked against the exact manufacturer’s technical documentation.


MC4 Connector Voltage Rating Chart

MC4 connectors are designed for photovoltaic DC applications, where system voltage can be significantly higher than ordinary low-voltage electrical connections.

Different connector generations have different approved voltage ratings.

Connector Type Reference Voltage Rating
Original MC4, older configurations Up to 1000 V DC
Original MC4, specified newer configurations Up to 1100 V DC under IEC
MC4-Evo 2 Up to 1500 V DC
MC4-Evo stor Up to 1500 V DC
MC4-Evo 2000 Up to 2000 V DC

These values are product-specific. The applicable rating depends on the connector model, cable cross-section, certification, and system design.

For example, Stäubli’s original MC4 documentation specifies 1100 V DC under IEC for certain 2.5, 4, and 6 mm² cable configurations, while its 10 mm² configuration remains at 1000 V DC in that documentation.

Never use a connector above its approved voltage rating.


MC4 Connector Types and Variations

Several MC4 connector variations are available for different solar installation requirements.

1. Standard MC4 Connector

The standard MC4 connector is a single-pole solar connector with a 4 mm contact system.

Its main features include:

  • Male plug and female socket versions
  • Locking mechanism
  • Cable gland and sealing components
  • Crimp-style electrical contacts
  • Outdoor solar installation design

It is commonly used to connect solar panels and PV cables.

2. MC4-Evo 2 Connector

MC4-Evo 2 is a newer connector family designed for demanding photovoltaic applications.

Stäubli specifies DC 1500 V certification for this product family and a maximum current rating of up to 69 A for suitable configurations.

The actual current rating depends on the cable and connector combination.

3. MC4-Evo stor Connector

MC4-Evo stor is designed for photovoltaic and energy-storage applications.

Its published specifications include:

  • 4 mm connector system
  • DC 1500 V rating
  • Support for specified cable sizes from 2.5 to 10 mm²
  • Different current ratings depending on cable cross-section
  • Crimp-style termination

This connector family is intended for compatible high-performance DC applications.

4. MC4-Evo Ready Connector

MC4-Evo ready uses a crimp-free connection system with a spring-clamp mechanism.

Its published specifications include:

  • DC 1500 V rated voltage
  • 30 A rated current
  • 4 mm² and 6 mm² cable compatibility
  • Cable outside diameter of approximately 5.4–7.6 mm

It is designed to simplify cable assembly while maintaining compatibility with suitable original MC4 products.

5. MC4 Branch Connectors

Branch connectors are used to connect multiple solar panel strings in parallel.

Common configurations include:

  • 2-to-1 branch connectors
  • 3-to-1 branch connectors
  • 4-to-1 branch connectors

The correct branch connector depends on the PV system design, current requirements, cable size, and compatibility with the connected modules.

Also Read:


MC4 Connector Comparison Chart

Connector Type Main Feature Typical Application
Standard MC4 4 mm contact system Solar panel connections
MC4-Evo 2 Higher-performance PV connection Modern solar installations
MC4-Evo stor Energy-storage-compatible connector family PV and storage systems
MC4-Evo ready Crimp-free spring-clamp connection Simplified cable assembly
MC4 branch connector Multiple cable connections Parallel PV strings

Not all MC4-style products are interchangeable. Connectors should only be mated when the manufacturers explicitly approve the combination.


MC4 Male vs. Female Connector

MC4 connectors use male and female contact configurations to complete a single-pole electrical connection.

Feature Male MC4 Female MC4
Contact type Plug Socket
Contact arrangement Protruding contact Recessed contact
Main purpose Mates with female connector Receives male connector
Connector system 4 mm 4 mm
Common application Solar cable connection Solar cable connection

A solar connection typically uses one male and one female connector to form a complete electrical pair.

Understanding MC4 Polarity

The male and female contact names do not always tell you which cable is positive or negative.

Solar panel manufacturers may use different lead arrangements. Check the molded polarity markings and the solar module wiring diagram before connecting the cables.

Never rely only on the connector’s gender to identify electrical polarity.

Also Read:


How to Measure an MC4 Connector

Measuring an MC4 connector accurately helps identify its size and determine whether it fits a particular solar cable.

1. Measure the Connector Length

Use a digital caliper to measure the overall length from the front mating surface to the rear of the housing.

The result may differ between standard MC4, MC4-Evo, and branch connector versions.

2. Measure the Housing Diameter

Measure the widest external section of the connector housing. Some original MC4 cable-coupler assemblies have an external diameter of approximately 18.8 mm.

3. Check the Contact System

Standard MC4 products use a 4 mm contact system. Confirm the contact type and dimensions against the manufacturer’s drawing.

4. Measure the Cable Conductor

Strip the cable only when it is safely disconnected and prepared for termination. Identify its actual conductor cross-section, such as 4 mm² or 6 mm².

5. Measure the Cable Outside Diameter

Use a caliper to measure the insulated cable. Compare the result with the connector’s specified cable-gland range.

6. Identify the Connector Model

Check the manufacturer, model number, contact type, and product series. This is especially important when replacing connectors in an existing PV installation.

Also Read:


How to Choose the Correct MC4 Connector

Choosing the right MC4 connector involves checking electrical specifications, mechanical compatibility, and installation requirements.

1. Match the Cable Cross-Section

Choose a connector contact designed for the conductor size. A 4 mm² cable requires a compatible 4 mm² contact, while a 6 mm² cable requires the corresponding contact configuration.

2. Check the Cable Outside Diameter

Confirm that the cable fits the connector’s gland and sealing system. The conductor size alone is not enough.

3. Verify Current Rating

Check the connector’s rated current for the selected cable size and certification standard.

Do not assume that all MC4 connectors have the same current rating.

4. Confirm System Voltage

Choose a connector rated for the maximum DC voltage of the PV system.

Consider the maximum possible open-circuit voltage, including the effect of low temperatures, rather than only the panel’s nominal operating voltage.

5. Check Manufacturer Compatibility

Use connectors that are approved to mate with each other. Similar-looking MC4-style connectors from different manufacturers may not have been tested or certified as a compatible pair.

6. Use the Correct Crimping Tool

For crimp-style MC4 connectors, use the manufacturer’s specified contact and crimping tool. Incorrect crimping can increase resistance and cause overheating.

7. Consider Environmental Conditions

Solar connectors are exposed to outdoor conditions. Check UV resistance, temperature limits, moisture protection, and the specified protection rating.


MC4 Connector Protection and Temperature Specifications

Outdoor solar connectors must withstand sunlight, rain, temperature changes, and other environmental conditions.

For example, the published Stäubli MC4-Evo stor specifications include:

Specification Reference Value
Mated protection rating IP65/IP68
Unmated protection rating IP2X
Ambient temperature -40°C to +85°C
Upper limiting temperature 115°C
Contact resistance ≤ 0.2 mΩ
Insulation material Polyamide
Flammability class UL94 V-0

These specifications apply to the identified MC4-Evo stor product, not every MC4 connector.

What Does IP68 Mean for MC4 Connectors?

IP68 indicates protection against dust and water ingress under specified test conditions.

However, the protection rating applies to the connector in the manufacturer’s stated configuration. An unmated connector may have a different protection rating and may require a suitable sealing cap.

Never assume that an open or disconnected MC4 connector is waterproof.


Common MC4 Connector Applications

Solar Panel Connections

MC4 connectors are commonly used to connect the positive and negative output leads of photovoltaic modules.

Solar Extension Cables

Compatible MC4 connectors allow installers to extend solar cable runs between modules, combiner boxes, and other PV equipment.

Solar Combiner Boxes

MC4 connections can be used in suitable solar string arrangements and compatible combiner equipment.

Grid-Tied Solar Systems

MC4 connectors are widely used in PV systems that connect solar arrays to grid-connected inverters.

Off-Grid Solar Systems

Off-grid installations also use MC4 connectors for compatible solar panel and DC cable connections.

Battery and Energy Storage Systems

Some PV connector families are designed for applications involving solar generation and energy storage. Connector selection must follow the equipment manufacturer’s requirements.


Common MC4 Connector Sizing Mistakes

Confusing Cable Size With Cable Diameter

A 6 mm² conductor does not mean that the insulated cable has a 6 mm outside diameter. Both measurements must be checked.

Mixing Incompatible Brands

Two connectors that look similar may not have approved mating compatibility. Use manufacturer-approved combinations.

Choosing a Connector by Voltage Alone

Voltage rating does not determine current capacity. Check both ratings and the cable specification.

Using the Wrong Crimping Tool

An incorrect crimp can produce a poor electrical connection and increase contact resistance.

Ignoring the Cable Gland

A connector may accept the conductor but fail to seal properly if the cable’s outside diameter is unsuitable.

Disconnecting Under Load

PV connectors should not be disconnected while carrying current unless the specific equipment is designed and rated for that operation. Follow the manufacturer’s isolation and disconnection procedure.

Using Damaged Connectors

Cracked housings, corroded contacts, loose connections, and damaged seals can compromise electrical and environmental protection.


Frequently Asked Questions

What is the standard MC4 connector size?

MC4 connectors use a 4 mm contact system. Common solar cable versions support 2.5, 4, and 6 mm² conductors, while some newer versions support 10 mm².

What size wire does an MC4 connector use?

Common MC4 connector options are designed for 2.5, 4, and 6 mm² solar cables. Compatible newer product families may also support 10 mm² cable.

What is the current rating of an MC4 connector?

The current rating depends on the exact model and cable size. For example, Stäubli’s MC4-Evo stor documentation lists IEC ratings from 32 A to 62 A for specified cable configurations.

What is the voltage rating of an MC4 connector?

Voltage ratings vary by product family. Some original MC4 configurations are rated up to 1100 V DC under IEC, while specified MC4-Evo products support 1500 V DC.

Are all MC4 connectors compatible?

No. Similar-looking connectors from different manufacturers or product families are not automatically interchangeable. Use manufacturer-approved mating combinations.

What is the difference between male and female MC4 connectors?

The male connector has a plug contact, while the female connector has a socket contact. They mate to form a single-pole electrical connection.

Are MC4 connectors waterproof?

Some specified MC4 connectors achieve IP65/IP68 protection when properly mated. Their protection rating when disconnected is different and may require sealing caps.

Can MC4 connectors be used for 10 mm² cable?

Yes, but only when the specific connector and contact are designed for 10 mm² conductors. Standard 4–6 mm² connectors should not be assumed to support this cable size.

How long do MC4 connectors last?

Their service life depends on product quality, correct installation, environmental exposure, and maintenance. Use genuine compatible products and inspect connections periodically.


Conclusion

MC4 connectors are essential components in photovoltaic systems because they provide secure connections between solar panels and compatible DC equipment. Standard versions use a 4 mm contact system and commonly support 2.5, 4, and 6 mm² solar cables, while selected newer product families support larger conductors.

Before choosing an MC4 connector, verify the cable cross-section, cable outside diameter, current rating, voltage rating, contact type, and manufacturer compatibility. Always follow the exact product datasheet and approved installation procedure to ensure a reliable solar connection.